MOLDED OPTICAL CAMERA/VIDEO GLASS DOMES (LOW & HIGH PRESSURE) - FLANGED
WHAT IS A RAYOTEK FLANGED PTZ CAMERA OPTICAL GLASS DOME?
The ideal molded optical camera dome is not just transparent; it is optically invisible (it cannot be detected in any way by eye or camera). In optical jargon, one would say the "wavefront error" approaches zero. To reduce costs, commercially available molded optical domes are often poorly designed and/or made from plastic or low quality glass, all of which can compromise the image quality transmitting through its walls. Even high quality, more costly glass domes can exhibit compromised signal transmission if not designed properly. Rayotek Flange Mounted Molded Domes are made from high quality, optically clear borosilicate glass using a proprietary non-contact molding process to eliminate mold marks.
What is the ideal optical camera dome system? A Rayotek Optical Camera Dome mounted to a flange using proprietary Rayotek flange mounting technology. Rayotek's domes are robust, durable, easy to mount on existing systems, and with the proper choice of flanged optical glass domes, can withstand thousands of PSI of pressure in extremely hostile environments.Common optical issues with flanged molded camera glass domes:
- Overall Distortion - caused by poor glass dome design, variations in the wall thickness and inhomogeneity of the material. For PTZ camera systems distortion become even more problematic
- Localized Distortion & Speckle - caused by mold marks, bubbles, pits, scratches & other local defects
- Haziness - caused by micro-surface abrasion, devitrification & low quality bulk material日本亚洲欧美在线久草在线观看 日本亚洲欧美在线久草 ,国产亚洲AⅤ在线电影在线观看 国产亚洲AⅤ在线电影无 ,放荡老师淑敏小说无删在线观看 放荡老师淑敏小说无删
- Reduced Transmission - due to bulk material signal attenuation, exaggerated by poor quality material
- Color Shift & Chromatic Aberration - caused by non-neutral material color filtering & color dispersion
- Parallax Error – due to overall system design including camera positioning
- Fresnel Reflections (aka, Fresnel losses) – a natural surface effect that reduces transmission and causes multiple images & signal loss but can be reduced and/or eliminated by good system design and AR coatings
- Mounting issues: a poorly designed flange mounting system is dangerous and can put costly equipment at risk. Rayotek has a proven past portfolio of safely designed, reliable systems. Rayotek Flanged Glass Domes are mounted to a rigid flange and are fully sealed against most hostile environments.
Commercial PTZ Glass Optical Camera Dome
Custom Glass Optical Camera Domes
日本亚洲欧美在线久草在线观看 日本亚洲欧美在线久草 ,国产亚洲AⅤ在线电影在线观看 国产亚洲AⅤ在线电影无 ,放荡老师淑敏小说无删在线观看 放荡老师淑敏小说无删
In more simple language, the dome material can distort and change the color of an image or light transmitting through it. The better quality the camera dome and dome material, the less it impacts the image or light transmitting through it. Rayotek engineering can work with you to determine the best solutions for your flanged glass dome requirements.
Important long-term reliability issues to consider in designing a flanged molded optical glass dome:
- Radiation (light) Degradation - exposure to sunlight and intense lighting can cause yellowing and solarization over time, reducing the clarity and color neutrality of dome materials. Not only can many plastics yellow, some cheaper glasses will darken over time with intense lighting, especially when UV is present.
- Thermal Failure & Degradation – plastic domes will embrittle, and loose strength and optical clarity over time when exposed to excessive heat. Glass domes can crack and sometimes even explode when subjected to thermal shock if the wrong glass material is chosen. Not only are the obvious environments such as furnace systems, welding stations, and laser systems a risk, seemingly ordinary environments like a tarmac in the desert or an aircraft carrier deck can get extremely hot and water from a cold hose can cause some glasses to fail.
- Mechanical Stresses - impacts, explosions, abrasion and other environmental hazards can compromise both the optical and mechanical performance of a camera dome. Some glass materials are stronger than others, such as Rayotek borosilicate glass and additionally some glass materials can be strengthened (see below). For more information about glass in high strength applications, see our pages on Aerospace Glass DomesandMarine, Deep Sea & Down-Hole Domes.
- Flange Seal Failure - a mounted glass dome is only as strong the seal to the flange. Just as important is the reliability and durability of the seal between the housing and the glass dome. Rayotek has spent over 25 years of research, engineering, and exhaustive testing, to develop flanged dome mounting systems.
Extended Height Deep Sea Optical Camera Dome
Some solutions to the above quality and reliability issues are simple and relatively low cost to resolve, others are not so simple and thus more costly. It is important that the designer understands both the minimum requirements for the application, as well as the limitations of the imaging and image processing equipment. For example, there is no reason to purchase a high-end camera dome for a low cost camera system used for backing up a vehicle or monitoring fluid levels. On the other hand, a camera dome for a UAV or drone used for high-resolution surveillance may require all items above to be carefully considered and optimized.
Questions about what you've read so far? Feel free to call and talk with one of our engineers. With over 25 years of experience in glass optics, Rayotek can guide you towards the optimal, cost-effective glass dome design.
Integrated Structural Flange on Deep Sea Optical Camera Dome
HOW TO CHOOSE THE BEST PTZ GLASS DOME FOR YOUR APPLICATION
Rayotek engineering suggests using these key points:
- Get a good understanding of the application requirements to avoid overkill; overkill is normally synonymous with "overcost".
- Determine what the performance limitations are for the actual imaging system. It's wise to make sure the dome will not interfere with the imaging system's performance, but beyond that , once again, overkill = overcost.
- The method of manufacturing can have a big impact on the optical and mechanical performance of the dome and cost of manufacturing.
- Ground and polished domes are traditionally more precise in shape, take much longer to make, and are much more costly.
- Molded glass domes can be press molded or slumped from a flat sheet of glass (float glass).
- Press molded domes tend to have a lot of mold marks and distortion, which is fine for non-optical applications such as lighting.
- Slump molded glass domes, specifically when made from the non-contact Rayotek molding process, actually have a better surface quality than the best ground and polished domes and are significantly lower in cost. The slight reduction in precision of slump molded optical glass domes is, in most cases, still far more than adequate for commercial, and many high tech optical, dome applications.
- The material chosen has a big impact on the optical performance and durability of a glass dome.
- Plastic is the lowest cost material for making optical domes, but over time will degrade and scratch, especially when exposed to heat, wear, intense light, or simple cleaning.
- Slump molded glass domes are typically made from the same types of quality glass as ground and polished domes. A big advantage of the slumping process is slump molded glass domes can be made from readily available, relatively low cost "float" type glass such as soda lime, borosilicate or "Gorilla®" type sheet glasses.
- Rayotek uses hand picked float type glasses with pristine surfaces that require no pre-grind and polish of the starting sheets. In cases where zero-color glasses such as BK7 or more exotic filter glasses are required, sheets can be ground and polished and then slumped. It is harder to control the final wall thickness of slumped glass domes, but in most cases the wall thickness does not compromise the optical performance of an optical glass dome.
- Choose the best flange material(s) and leave the sealing process to Rayotek. There are a variety of materials for making the flange and the seals. Different materials are appropriate for different applications. Temperature, pressure, chemistries, mass and radiation all play a roll in deciding the best flanged sealing system. And as noted above, overkill = cost.
Scratch & Impact Resistant Glass Security Camera Dome
HOW TO STRENGTHEN GLASS:
Often, optical domes are exposed to mechanically challenging conditions where it is beneficial to strengthen the glass. There are some glass materials that lend themselves well to strengthening.
Traditional thermal tempering methods ("toughened glass") can be used but will introduce some distortion into the dome because the dome must be heated to close to the softening point, causing the dome walls to warp and distort.
The ideal method for optical dome strengthening is known as chemical strengthening. Chemical strengthening can only be performed on soda lime glass, or, better yet, glasses designed specifically for chemical strengthening, such as Gorilla® Glass by Corning, Dragontrail® glass by AGC and Xensation® Glass by Schott. These unique glasses have made modern cell phone and notepad screens so durable and scratch resistant.
All said about ways to strengthen glass; the best way to strengthen glass is to mount it properly. Rayotek Sight Windows knows how, more than any other company.
If you have a product or system that relies on high quality flanged optical glass domes, for both low and high strength applications, contact us. We have Rayotek Sight Window engineers that can review your requirements and work with you to find the ideal solution.
RAYOTEK FLANGED DOMES CAPABILITIES LINKS